|
|
|
| ||
|
JB Custom Fabrication T-shirt Code: JBT Price: $13.50 Quantity in Basket: none | |
|
| ||
|
| ||
|
Early Bronco stainless steel top installation hardware kit 66/77 Code: TKIT Price: $26.50 Quantity in Basket: none | |
|
| ||
|
| ||
|
Early Bronco clutch pushrod 66-77 stainless, adjustable Code: EBCROD Price: $32.00 Quantity in Basket: none | |
|
| ||
|
| ||
|
Early Bronco tailgate hardware stainless Code: TGKIT Price: $23.00 Quantity in Basket: none | |
|
| ||
|
| ||
|
Twin-stick shifter boot Code: TSB Price: $26.50 Quantity in Basket: none | |
|
| ||
|
| ||
|
Billet aluminum twin-stick shifter knobs Code: KBLT Price: $35.00 Quantity in Basket: none | |
|
| ||
|
| ||
|
Ford Bronco 78-79 Truck 73-79 clutch pushrod Code: BBCROD Price: $37.50 Quantity in Basket: none | |
|
| ||
|
| ||
|
International Scout D-20 stainless twin-stick w/boot Code: D20IH Price: $119.00 Quantity in Basket: none | |
|
| ||
|
| ||
|
Jeep Commando / Jeepster W/TH-400 twin-stick stainless w/ boot Code: D20JJ Price: $132.00 Quantity in Basket: none | |
| Jeep D-20 Jeepster / Commando stainless steel twin-stick shifter Made for the Jeep Dana 20 transfer case With automatic transmission This shifter fits the Jeep D-20 that has the shifter mount on an extension housing that sticks forward of the transfer case on the passenger side. And is designed to be relocatable further back on the stock extension housing, as the sliding collar is open-ended, and the adjuster rods are threaded. The adjuster rods and adjusters are 303 stainless, and are fine threaded allowing for small adjustments. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters. This shifter does not have a mount for the front driveline carrier bearing, it can only be used with singe piece front drivelines! All threaded parts are done on a CNC machine, all bends are done on a bending machine, all welded parts are jig welded These shifters are designed to be rock-solid. you won't find any "one size fits all" erector set lookin' brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, and even stainless steel screws to finish it off! Note: This shifter does not fit CJ type D-20 cases Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be nessasary. MADE IN THE USA | ||
|
| ||
|
Early Bronco / Early Mustang Clutch rod bushing METAL Code: CBUSH Price: $7.50 Quantity in Basket: none | |
|
ONE PAIR OF FORD TYPE CLUTCH PUSHROD BUSHINGS METAL! YES, YOU DON'T HAVE TO REPLACE YOUR BUSHINGS WITH PLASTIC ANY MORE! These bronze bushings are machined just for your Ford Fits Early Bronco 66-77/ Mustang 64-73 / and others with 3/8'' ID replaces Ford part # C0AZ-7526-B
| ||
|
| ||
|
Bronco 66 77 stainless steel door hardware kit Code: DHDWR Price: $28.50 Quantity in Basket: none | |
|
Early Bronco stainless steel door hardware kit. 66-77 Here is everything you need to replace all the visible bolts that hold your doors on or together, with stainless steel. Includes stainless washers.< | ||
|
| ||
|
Early Bronco stainless steel door hinge bolts / washers Code: DRHNGBLT Price: $18.00 Quantity in Basket: none | |
|
Early Bronco stainless steel door hinge bolts / washers. 66/77 Here are the bolts and washers that you need to replace all of the hardware that attach your door hinges to the door, and the body. | ||
|
| ||
|
Aluminum ball knob 1-3/8" dia. 1/2" coarse thread Code: ABK Price: $8.75 Quantity in Basket: none | |
|
Polished aluminium shifter ball knob W/ stainless steel jamb nut Fits Currie and most other twin-stick shifters 1-3/8" dia. 1/2" coarse thread | ||
|
| ||
|
Jeep CJ Dana 20 "long" stainless twin-stick shifter Code: CJ20L Price: $124.00 Quantity in Basket: none | |
| This shifter fits the Jeep CJ transfer case that has the stock shifter mounted about 7” in front of the transfer case, and a straight shift pattern, typicly a 4-speed application. Does not fit J series, Wagoneer, Cherokee, Commando / Jeepster. Allows independent operation of front and rear drive. (completely independent with removal of internal shift interlock pills) Stainless steel twin-stick shifter Made for the Dana Jeep CJ Dana-20 transfer case This transfer case shifter is made specifically to replace the stock shifter. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters. These shifters are designed to be rock-solid, you won't find any ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, shift pattern decal, and even stainless steel screws to finish it off! Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be necessary. MADE IN THE U.S.A. It offers short throw shifting, and rock solid feel due to the heavy stainless stock used to construct the shifter. This shifter comes with adjustable linkage made from stainless threaded rod, and quality metal rod ends. | ||
|
| ||
|
Stainless ball knob 1-3/8" dia. 7/16" fine thread Code: SBK1D7FT Price: $12.50 Quantity in Basket: none | |
|
Polished stainless steel shifter ball knob W/ stainless steel jamb nut Fits all JB Custom Fabrication twin-stick transfer case shifters. 1-3/8 dia. ball 7/16-20 (fine thread) | ||
|
| ||
|
|
Stainless ball knob 1-3/8" dia. 1/2" coarse thread Code: SBK1 Price: $12.50 Quantity in Basket: none | |
|
Polished stainless steel shifter ball knob W/ stainless steel jamb nut Fits Currie and most other twin-stick shifters 1-3/8" dia. 1/2" coarse thread | ||
|
| ||
|
|
Stainless ball knob 1-3/8" dia. 3/8" fine thread Code: SBK1D Price: $12.50 Quantity in Basket: none | |
|
Polished stainless steel shifter ball knob W/ stainless steel jamb nut Fits NP-435, and some others. 1-38" dia. 3/8" fine thread | ||
|
| ||
|
Aluminum ball knob 1-7/8 1/2 coarse thread Code: ABK11CTWJN Price: $14.50 Quantity in Basket: none | |
|
Polished aluminium shifter ball knob W/ stainless steel jamb nut 1-7/8" dia. ball 1/2"-13 (coarse thread) | ||
|
| ||
|
Aluminum ball knob 1-7/8 3/8 fine thread Code: ABK13FT Price: $14.50 Quantity in Basket: none | |
|
1-7/8" dia. ball 3/8"-24 (fine thread) | ||
|
| ||
|
Jeep CJ Dana 20 "short" stainless twin-stick shifter Code: CJ20S Price: $124.00 Quantity in Basket: none | |
| This shifter fits the Jeep CJ Dana-20 transfer case that has the stock shifter mounted right up against the transfer case, and a straight shift pattern, typicly 3-speed applications. *note will not fit most 76-79 3-speed applications as many of them are clocked (email us if you have 76-79 3-speed prior to ordering). Does not fit J series, Wagoneer, Cherokee, Commando / Jeepster. Allows independent operation of front and rear drive. (completely independent with removal of internal shift interlock pills) Stainless steel twin-stick shifter Made for the Dana Jeep CJ Dana-20 transfer case This transfer case shifter is made specifically to replace the stock shifter. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters. These shifters are designed to be rock-solid, you won't find any ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, shift pattern decal, and even stainless steel screws to finish it off! Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be necessary. MADE IN THE U.S.A. It offers short throw shifting, and rock solid feel due to the heavy stainless stock used to construct the shifter. | ||
|
| ||
|
Billet transmission shifter knob T-18 Code: KBT18 Price: $38.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the tranfer cases. Now to match your Transmission shifter. 4 speed with reverse over/up 3/8"-24 (fine thread) comes with stainless steel jamb nut | ||
|
| ||
|
Jeep Commando / Jeepster W/ 3 speed twin-stick stainless w/ boot Code: D20JJS Price: $129.00 Quantity in Basket: none | |
|
Jeep D-20 Jeepster / Commando
stainless steel twin-stick shifter
Made for the Jeep Dana 20 transfer case W / 3 speed tranny
This shifter fits the Jeep D-20 that has the shifter mount on an extension housing that sticks forward of the transfer case on the passenger side. The adjuster rods and adjusters are 303 stainless, and are fine threaded allowing for small adjustments. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters.
This shifter does not have a mount for the front driveline carrier bearing, it can only be used with singe piece front drivelines!
All threaded parts are done on a CNC machine, all bends are done on a bending machine, all welded parts are jig welded
These shifters are designed to be rock-solid. you won't find any "one size fits all" erector set lookin' brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware.
This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, and even stainless steel screws to finish it off!
Note: This shifter does not fit CJ type D-20 cases
Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be necessary. MADE IN THE USA | ||
|
| ||
|
T-bolt hose clamp Code: THC Price: $4.24 Quantity in Basket: none | ||
| click "add to cart", to choose sizes | ||
|
| ||
|
Twin-stick shift decal, drivers side front differential Code: DECALDS Price: $2.00 Quantity in Basket: none | |
| Shifter gear selection decal 2" X 3" All weather vinyl. For Ford D-20, NP-205 and other domestic transfer cases with driver side front differential Ships US mail unless ordered with another item.(included in cost) | ||
|
| ||
|
Twin-stick shift decal, passenger side front differential Code: DECALPS Price: $2.00 Quantity in Basket: none | |
| Shifter gear selection decal 2" X 3" All weather vinyl. For Chvrolet, Dodge, Jeep, International D-20, NP-205, D-300 and other domestic transfer cases with passenger side front differential Ships US mail unless ordered with another item. (included in cost), | ||
|
| ||
|
Shifter handle Code: SHFTHNDL Price: $12.50 Quantity in Basket: none | |
| For the do it yourselfer. Save a little time and effort. 12” long, ½” diameter, with 7/16-20” threads 303 stainless steel | ||
|
| ||
|
Triple-stick boot Code: TRSB Price: $36.50 Quantity in Basket: none | |
|
| ||
|
| ||
|
Jeep D-300 Stainless twin-stick shifter Code: D-300J Price: $99.00 Quantity in Basket: none | |
| Stainless steel twin-stick shifter Made for the Jeep Dana 300 transfer case (5/8" pivot bolt) This transfer case shifter is made specifically to replace the stock shifter. You won’t have the problems with our D-300 shifters that you will with "one size fits all" erector set lookin' twin-stick shifters that puts the shifter handles up under your dash! These shifters are designed to be rock-solid you won't find any "one size fits all" brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, shift pattern decal, and even stainless steel screws to finish it off! Note: Not all installations / applications are the same, some floor trimming or shifter adjustment might be necessary. MADE IN THE U.S.A. | ||
|
| ||
|
NP-205 stainless twin-stick shifter Ford style Code: NP205F Price: $155.00 Quantity in Basket: none | |
| NP-205 stainless twin-stick shifter Ford type. Heavy duty stainless. Linkage includes quality rod ends, and stainless threaded rod for rattle free operation and ease of adjustment. Comes complete with: Two linkage sets for the two different adapters. US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. And instructions for the internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA | ||
|
| ||
|
NP-205 stainless twin-stick Chevy 8 bolt style Code: NP205GM-8 Price: $155.00 Quantity in Basket: none | |
| NP-205 stainless twin-stick shifter GM type. Heavy duty stainless. For 8 bolt “figure 8” mounting pattern. Linkage includes quality rod ends, and stainless threaded rod for rattle free operation and ease of adjustment. Comes complete with: US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. And instructions for the internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA | ||
|
| ||
|
Early Bronco "T" type stainless twin-stick Code: EB20T Price: $134.00 Quantity in Basket: none | |
| D-20 stainless twin-stick shifter “T” type. Intended for replacement of stock shifter on stock drivetrain. Heavy duty stainless. Linkage includes quality rod ends, and stainless threaded rod for rattle free operation and ease of adjustment. Laser cut lower interfaces, CNC machined pivots,, oil impregnated bronze bushings. Comes complete with: US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. Internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA Any questions, please email us at jonb@jbfab.net | ||
|
| ||
|
Early Bronco "J" type stainless twin-stick Code: EB20J Price: $134.00 Quantity in Basket: none | |
| D-20 stainless twin-stick shifter “J” type. Intended for replacement of stock shifter on stock drivetrain. Heavy duty stainless. Laser cut lower interfaces, CNC machined pivots, oil impregnated bronze bushings. Comes complete with: US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. No internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA Any questions, please email us at jonb@jbfab.net | ||
|
| ||
|
F5SB Code: F5SB Price: $4.13 Quantity in Basket: none | |
| 5/16-24" FEMALE ROD END BRONZE BUSHING RIGHT HAND THREAD | ||
|
| ||
|
|
F6SB Code: F6SB Price: $4.74 Quantity in Basket: none | |
| 3/8-24" FEMALE ROD END BRONZE BUSHING RIGHT HAND THREAD | ||
|
| ||
|
|
F7SB Code: F7SB Price: $5.34 Quantity in Basket: none | |
| 7/16-20" FEMALE ROD END BRONZE BUSHING RIGHT HAND THREAD | ||
|
| ||
|
CF5Y Code: CF5Y Price: $3.52 Quantity in Basket: none | |
| 5/16-24" FEMALE ROD END W/ STUD ECONOMY RIGHT HAND | ||
|
| ||
|
|
CF6Y Code: CF6Y Price: $4.21 Quantity in Basket: none | |
| 3/8-24" FEMALE ROD END W/ STUD ECONOMY RIGHT HAND | ||
|
| ||
|
Twin-stick ring only Code: TWINRING Price: $8.00 Quantity in Basket: none | ||
| Ring only for our twin-stick shifter boots. Price includes shipping via US Mail (continential US) | ||
|
| ||
|
Triple-stick ring only Code: TRIPLERING Price: $11.50 Quantity in Basket: none | ||
| Ring only for our triple-stick shifter boots. Price includes shipping via US Mail (continential US) | ||
|
| ||
|
Billet transmission shifter knob NP-435 / T-19 / SM-465 Code: KBNP435 Price: $38.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 4 speed with reverse over/down 3/8"-24 (fine thread) comes with stainless steel jamb nut | ||
|
| ||
|
Single-stick shifter boot Code: SSB Price: $18.50 Quantity in Basket: none | |
| High quality universal shifter boot made for single stick shifters. With brushed stainless trim ring. 2-1/2" X 8" outside dimensions Made in the USA | ||
|
| ||
|
|
Aluminum ball knob 1-3/8" dia. 7/16" fine thread Code: ABK38 Price: $8.75 Quantity in Basket: none | |
| Polished aluminium shifter ball knob W/ stainless steel jamb nut Fits our twin-stick shifters 1-3/8" dia. 7/16" fine thread | ||
|
| ||
|
International Scout D-300 stainless twin-stick w/boot Code: D300IH Price: $109.00 Quantity in Basket: none | |
| Stainless steel twin-stick shifter Made for the International Dana 300 transfer case (1/2" pivot bolt) This transfer case shifter is made specifically to replace the stock shifter. You won’t have the problems with our D-300 shifters that you will with "one size fits all" erector set lookin' twin-stick shifters that puts the shifter handles up under your dash! These shifters are designed to be rock-solid you won't find any "one size fits all" brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, shift pattern decal, and even stainless steel screws to finish it off! Note: Not all installations / applications are the same, some floor trimming or shifter adjustment might be necessary. MADE IN THE U.S.A. | ||
|
| ||
|
H1 wheel o-ring Code: H1O-ring Price: $6.74 Quantity in Basket: none | |
| This is the O-ring that goes between the two halves of the H-1 steel rim. This O-ring fits 8 & 12 bolt style rims | ||
|
| ||
|
H1 wheel valve Code: H1valve Price: $4.25 Quantity in Basket: none | |
| This is the replacement valve for the stem on a 12-bolt style H1 rim. If you need the stem itself, you will need to contact your local Hummer dealer. Comes with cap. | ||
|
| ||
|
Billet transfer case knob blank Code: KBLTBLNK Price: $18.00 Quantity in Basket: none | |
| Billet knob same as our transfer case knobs, but bank. Threads are 7/17-20, same as our shifter handles. | ||
|
| ||
|
CT-1 Code: CT-1 Price: $7.50 Quantity in Basket: none | |
| Weld-on tab 5/8" thick, 1" hole 4-3/4" base, 2-1/8" high, laser rough-cut from hot rolled steel *Sold as single item | ||
|
| ||
|
CT-2 Code: CT-2 Price: $8.10 Quantity in Basket: none | |
| Weld-on tab 5/8" thick, 1" hole, for square or rectangular tubing or other right angles. welds on from two sides. weld zones are 2-3/4" & 1-1/2" High profile is 2", low profile is 1". laser rough-cut from hot rolled steel *Sold as single item *Shackle sold seperately (item number AS-2) | ||
|
| ||
|
CT-3 Code: CT-3 Price: $6.00 Quantity in Basket: none | |
| Weld-on tab 5/8" thick, 1" hole, radius for 2" tube, 1-3/4" profile, 2-3/4 wide, laser rough-cut from hot rolled steel. *Sold as single item | ||
|
| ||
|
CT-4 Code: CT-4 Price: $5.75 Quantity in Basket: none | |
| Weld-on tab 5/8" thick, 1" hole, radius for 1-1/2" tube, 2" profile, 2-3/8 wide, laser rough-cut from hot rolled steel. *Sold as single item | ||
|
| ||
|
CT-5 Code: CT-5 Price: $7.50 Quantity in Basket: none | |
| Weld-on tab 5/8" thick, BIG 1-1/2" hole, 3" flat base , 3-1/4" profile, laser rough-cut from hot rolled steel. *Sold as single item | ||
|
| ||
|
AS-1 Code: AS-1 Price: $5.90 Quantity in Basket: none | |
| 1/2" (5/8")screw pin anchor shackle, hot dip galvanized, Working load 7275 lbs. | ||
|
| ||
|
AS-2 Code: AS-2 Price: $9.20 Quantity in Basket: none | |
| 5/8" (3/4")screw pin anchor shackle, hot dip galvanized, Working load 11,000 lbs. | ||
|
| ||
|
AS-3 Code: AS-3 Price: $16.25 Quantity in Basket: none | |
| 7/8" (1")screw pin anchor shackle, hot dip galvanized, Working load 20,950 lbs. | ||
|
| ||
|
Aux. idle control Code: AUXCONT Price: $46.00 Quantity in Basket: none | |
| Fine adjustable hand throttle / auxiliary idle control. Also works very well as a manual choke control. Turning the handle counter clockwise increases engine speed, locking ring adjusts the friction on the knob. To return to idle just hit the red button, and it all resets. Easley mountable on the dash, or on the shifter. High quality, made in the USA stainless wire. Wire to linkage hardware included. Bracketry and fabrication skills required depending on application and mounting location choice. Not designed to be used as cruise control. | ||
|
| ||
|
Jeep "full size" Wagoneer, Cherokee, J-series P/U Code: D20J Price: $129.00 Quantity in Basket: none | |
| Jeep "full size" Wagoneer, Cherokee, J-series P/U. Replaces stock shifter box that has "U" shaped shifter pattern. stainless steel twin-stick shifter Made for the Jeep Dana 20 transfer case With automatic transmission This shifter fits the Jeep D-20 that has the shifter mount on an extension housing that sticks forward of the transfer case on the passenger side. And is designed to be relocatable further back on the stock extension housing, as the sliding collar is open-ended, and the adjuster rods are threaded. The adjuster rods and adjusters are 303 stainless, and are fine threaded allowing for small adjustments. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters. This shifter does not have a mount for the front driveline carrier bearing, it can only be used with singe piece front drivelines! All threaded parts are done on a CNC machine, all bends are done on a bending machine, all welded parts are jig welded These shifters are designed to be rock-solid. you won't find any "one size fits all" erector set lookin' brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, and even stainless steel screws to finish it off! Note: This shifter does not fit CJ type D-20 cases Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be nessasary. MADE IN THE USA | ||
|
| ||
|
Billet aluminum twin-stick shifter knobs, black, 1/2-13 Code: KBLTBK12 Price: $35.00 Quantity in Basket: none | |
| 1 Pair twin-stick shifter knobs W/ stainless steel jam nuts. High quality shifter knobs machined from billet aluminum, hard anodized black, these knobs have the shift pattern laser etched. Threaded to fit most other brands of twin-stick shifters. Dimensions: 2-1/2" tall X 1-1/4" wide 1/2"-13 thread size. -Please confirm your thread size prior to ordering- | ||
|
| ||
|
|
Billet aluminum twin-stick shifter knobs, black , 7/16-20 Code: KBLTBK716 Price: $35.00 Quantity in Basket: none | |
| 1 Pair twin-stick shifter knobs W/ stainless steel jam nuts. High quality shifter knobs machined from billet aluminum, hard anodized black, these knobs have the shift pattern laser etched. Threaded to fit all of the JB Custom Fabrication twin-stick shifters. Dimensions: 2-1/2" tall X 1-1/4" wide 7/16"20 thread size. -Please confirm your thread size prior to ordering- | ||
|
| ||
|
Billet transmission shifter knob black NP-435 / T-19 / SM-465 Code: KBNPBK435 Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 4 speed with reverse over/down 3/8"-24 (fine thread) comes with stainless steel jamb nut Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
Billet transmission shifter knob blackT-18 Code: KBBKT18 Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 4 speed with reverse over/up 3/8"-24 (fine thread) comes with stainless steel jamb nut Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
Billet transmission shifter knob black 3-Speed Code: KBNPBK3SP Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 3-speed 5/16"-24 (fine thread). Fits most Jeep, Ford, IH top-loaders Comes with stainless steel jamb nut Hard anodized black, and laser etched. Please confirm thread size prior to ordering MADE IN USA | ||
|
| ||
|
Aux. idle control mount Code: AUXCONTMT Price: $12.00 Quantity in Basket: none | |
| Shifter mounting bracket for our aux. idle control. Fits shifters up to 3/4", comes with stainless steel set-screws | ||
|
| ||
|
Early Bronco "J" type stainless twin-stick AOD Code: EB20J-AOD Price: $138.00 Quantity in Basket: none | |
| D-20 stainless twin-stick shifter “J” type. built specificly for the Advance Adapters AOD conversion. Heavy duty stainless. Laser cut lower interfaces, CNC machined pivots, oil impregnated bronze bushings. Comes complete with: US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. No internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA | ||
|
| ||
|
Early Bronco "T" type stainless twin-stick AOD Code: EB20T-AOD Price: $138.00 Quantity in Basket: none | |
| D-20 stainless twin-stick shifter “T” type. built specificly for the Advance Adapters AOD conversion. Heavy duty stainless. Laser cut lower interfaces, CNC machined pivots, oil impregnated bronze bushings. Comes complete with: US made shifter boot w/ stainless trim ring. All installation hardware. Waterproof, shift pattern decal. Installation instructions. Internal modifications required for independent control of the front & rear drives. Satisfaction guaranteed, or we will refund your purchase price. MADE IN THE USA | ||
|
| ||
|
Billet transmission shifter knob black 5-speed 3/8-24 Code: KBBK5SP3824 Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 5 speed with reverse over/down 3/8"-24 (fine thread) comes with stainless steel jamb nut Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
|
Billet transmission shifter knob black 5-speed 3/8-16 Code: KBBK5SP3816 Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 5 speed with reverse over/down 3/8"-16 (course thread) comes with stainless steel jamb nut Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
|
Billet transmission shifter knob black 5-speed 10mm-1.5 Code: KBBK5SP10MM Price: $35.00 Quantity in Basket: none | |
| The same quality billet aluminum knob as we have for the transfer cases. Now to match your Transmission shifter. 5 speed with reverse over/down 10mm X 1.5mm thread size, comes with stainless steel jamb nut Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
Billet doubler shifter knob black 7/16-20 Code: KBBKDLBHL71620 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler H/L 7/16-20 (fine thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
|
Billet doubler shifter knob black 1/2-13 Code: KBBKDLBHL1213 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler H/L 1/2-13 (coarse thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
Billet doubler shifter knob black 7/16-20 Code: KBBKDLBLH71620 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler low/high 7/16-20 (fine thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
|
Billet doubler shifter knob black 1/2-13 Code: KBBKDLBLH1213 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler low/high 1/2-13 (coarse thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
Billet doubler shifter knob black 7/16-20 BLANK Code: KBBKBLNK71620 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler, blank 7/16-20 (fine thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
|
Billet doubler shifter knob black 1/2-13 BLANK Code: KBBKBLNK1213 Price: $18.00 Quantity in Basket: none | |
| The same billet aluminum knob as we have for the transfer cases. Now for your doubler, blank 1/2-13 (fine thread) comes with stainless steel jamb nut, Hard anodized black, and laser etched. MADE IN USA | ||
|
| ||
|
H1 wheel nuts set of 8 zinc plated Code: wnuts8z Price: $7.90 Quantity in Basket: none | |
| These are the nuts that hold the two halves of the H1 steel wheel together. It is recomended that the nuts be replaced every time they are removed. Thes are the special hardened self locking nuts, not a cheap replacement. Set of 8 zinc plated | ||
|
| ||
|
H1 wheel nuts set of 12 zinc plated Code: wnuts12z Price: $9.60 Quantity in Basket: none | |
| These are the nuts that hold the two halves of the H1 steel wheels together. It is recomended that the nuts be replaced every time they are removed. Thes are the special hardened self locking nuts, not a cheap replacement. Set of 12 zinc plated | ||
|
| ||
|
Jeep CJ Dana 20 "short" stainless twin-stick shifter 76-79 Code: CJ20SC Price: $124.00 Quantity in Basket: none | |
| This shifter fits the Jeep CJ Dana-20 transfer case that has the stock shifter mounted right up against the transfer case, and a straight shift pattern. This shifter is for the 76-79 CJ with the T-150 tranny. Does not fit J series, Wagoneer, Cherokee, Commando / Jeepster. Allows independent operation of front and rear drive. (completely independent with removal of internal shift interlock pills) Stainless steel twin-stick shifter Made for the Dana Jeep CJ Dana-20 transfer case This transfer case shifter is made specifically to replace the stock shifter. BEWARE OF ONE SIZE FITS ALL shifters, there are 7 different configurations of Jeep D-20 cases / shifter combinations, unless you want to cut new holes in your floor, make sure you get a shifter that is built for your setup. Our shifters mount to your stock mounting bracket eliminating most of the locating issues with custom shifters. These shifters are designed to be rock-solid, you won't find any ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware. This shifter comes with installation / adjustment instructions, boot, stainless steel trim ring, shift pattern decal, and even stainless steel screws to finish it off! Note: Not all installations / applications are the same, a little floor trimming or shifter adjustment might be necessary. MADE IN THE U.S.A. It offers short throw shifting, and rock solid feel due to the heavy stainless stock used to construct the shifter. | ||